In a Burnaby condo, the den or second bedroom rarely gets to be one thing. It is an office on weekdays, overflow storage most of the time and a guest room only when someone visits. Murphy beds in Burnaby condos resolve that conflict: the bed folds into a wall cabinet when nobody needs it and comes down in seconds when someone does. A queen Murphy bed can fit many second bedrooms and larger dens, but only if you check four things first: the lowest point of the ceiling, the open depth of the bed, how the wall is built and what your strata bylaws require.
This guide walks through those checks with real manufacturer dimensions, the BC strata rules that apply to anchoring furniture into a building, and the layouts that work best in typical condo rooms.
| Key takeawaysA vertical queen Murphy bed projects roughly 85 to 93 inches from the wall when open. Add a walkway and you need about 9½ to 11 feet of clear room depth.A horizontal (side-tilt) bed needs far less depth and height, which makes it the better fit for many condo dens with bulkheads or a window on the bed wall.Published minimum ceiling heights for vertical queen models range from about 83½ to 94 inches. Measure the lowest obstruction, not the flat ceiling.In a BC strata, an alteration involving the building’s structure or common property needs the strata’s written approval under the Standard Bylaws. Ask before anyone drills.Murphy beds take a mattress within the maker’s thickness and weight limits, usually 10 to 12 inches, and no box spring. |
Why Burnaby Condo Owners Are Turning Dens and Second Bedrooms into Guest Rooms
Burnaby has added a large amount of new housing in recent years. Metro Vancouver’s housing data dashboard lists Burnaby among the areas with the greatest share of newly built owner-occupied housing between 2016 and 2021. For many owners in the towers around Metrotown, Brentwood and Lougheed, that means a one-bedroom-plus-den or a two-bedroom layout where the extra room has to cover work, storage and visitors.
A permanent guest bed wastes that room for most of the year. An air mattress or sofa bed is uncomfortable for longer stays, such as visiting parents or relatives in town for several weeks. A wall bed sits between those options: a real mattress on a real frame that disappears when the room goes back to being an office, a gym corner or a playroom.
How Much Space Does a Murphy Bed Need in a Condo?
A vertical queen Murphy bed typically needs a wall about 64 to 70 inches wide, a ceiling at least as high as the manufacturer’s stated minimum (often 84 to 94 inches), and 85 to 93 inches of open floor from the wall to the foot of the bed. A horizontal queen needs a wider wall, about 84 to 90 inches, but only about 65 to 68 inches of floor depth when open. Exact numbers vary by model, so confirm against the specification sheet of the bed you are considering.
| Dimension (queen) | Vertical (head to wall) | Horizontal (side to wall) |
|---|---|---|
| Cabinet height, closed | About 84–90 in | About 66–70 in |
| Cabinet width | About 64–70 in | About 84–90 in |
| Cabinet depth, closed | About 16–21 in | About 16–20 in |
| Projection when open | About 85–93 in | About 65–68 in |
| Published minimum ceiling height | About 83½–94 in, depending on model | Rarely the limiting factor |
| Clear room depth incl. a 30–36 in walkway | About 9½–11 ft | About 8–8¾ ft |
Ranges compiled from published manufacturer and retailer specifications for queen models (including Bestar, Lori and listings on Wayfair and Walmart) reviewed November 2026. The final row is our calculation: open projection plus the 30–36 inch walkway that Bestar recommends around an open bed. Always use your chosen model’s spec sheet.
That last row is the number most people miss. A vertical queen fits a room that is 9 feet deep on paper, but the guest will be squeezing past the foot of the bed. If your den is closer to 8 feet deep, a horizontal bed or a full-size bed is usually the more comfortable choice.
Vertical or Horizontal: Which Wall Bed Works Better in a Condo Den?
For a condo den, a horizontal wall bed is often the better choice, and it is underrated. Most people picture the classic vertical Murphy bed, but condo dens tend to have exactly the conditions that favour a side-tilt model.
Choose a horizontal bed when:
- A bulkhead, dropped ceiling or ceiling-mounted fixture runs along the bed wall.
- The bed wall has a window above waist height, since a horizontal cabinet can sit below it.
- The room is long and narrow rather than deep.
- You want usable shelf space on top of the closed cabinet.
Choose a vertical bed when:
- The room has about 10 feet of clear depth or more and a flat ceiling at the bed wall.
- You want the bed flanked by tall wardrobe or shelving cabinets to make a full furniture wall.
- Guests need to get in from both sides of the bed.
The trade-off with a horizontal bed is wall width and access: it takes up nearly the full length of a queen mattress along the wall, and in a narrow room the guest may only be able to get in from one side.
The Burnaby Condo Fit Test: Six Checks Before You Order
Run these six checks before you buy a Murphy bed or book a design consultation. They catch the problems that most often stop an installation in a condo.
- Measure the lowest point at the bed wall. Bulkheads, dropped ceilings, light fixtures and fire sprinkler heads all count. Compare that lowest point with the manufacturer’s minimum ceiling height, not with the cabinet height. Never box in or crowd a sprinkler head or smoke alarm; if the cabinet would sit close to one, ask your building manager before you finalize the design.
- Measure the open depth plus walkway. Use the open projection of your chosen model and add 30 to 36 inches so people can move past the foot of the bed.
- Find out how the wall is built. Condo walls can be poured concrete, steel stud or wood stud, and each needs a different anchoring method. Drywall anchors alone are not enough: one manufacturer’s installation instructions call for at least three studs for queen and king beds, and makers that allow masonry walls specify concrete screws.
- Check what is behind the cabinet. Outlets, thermostats, intercom panels and baseboard heaters can stop a cabinet sitting flush. Moving them is usually a job for a licensed electrician, and it may need strata approval.
- Test door swings. Make sure the room door and any closet doors still open fully when the bed is down.
- Plan the delivery path. Measure the elevator, the hallway turns and your suite door. Book the elevator and check your building’s move-in rules, since a large cabinet may need to come in flat and be assembled in the room.
Do You Need Strata Approval to Install a Murphy Bed in a BC Condo?
Often, yes. If anchoring the bed involves the building’s structure or common property, BC’s Standard Bylaws require the strata corporation’s written approval before the work is done.
Under Standard Bylaw 5 of the Strata Property Act, an owner must get written approval before altering a strata lot in a way that involves the structure of the building, common property within the strata lot, or parts of the lot the strata must insure. Standard Bylaw 6 requires written approval for any alteration to common property. Section 68 of the Act also places the boundary of a strata lot midway through a wall that separates it from another unit or from common property, unless the strata plan shows otherwise. In practice, that means fastening into a wall shared with a neighbour or the corridor can involve common property.
Your building may have amended these bylaws. The provincial government’s strata bylaw guidance notes that the Standard Bylaws apply except where a strata has filed different bylaws, so read your own bylaws or ask your property manager.
A practical approach: send the strata a short written request before installation. Include a drawing of the bed wall, the anchor type and locations, the installer’s name and proof of insurance, and the planned installation date. Ask about quiet hours for hammer drilling. The Standard Bylaws also say the strata must not unreasonably withhold approval for strata-lot alterations, though it can require you to take responsibility for related costs.
This section is general information, not legal advice. For a specific dispute or an unusual alteration, speak to your strata manager or a lawyer familiar with BC strata law.
Murphy Bed with a Desk, Shelving or Wardrobe: Which Combination Suits a Condo?
The best wall bed for a condo is usually part of a full wall of storage rather than a lone cabinet. The right combination depends on what the room does when the bed is up.
| Combination | Best for | Watch out for |
|---|---|---|
| Murphy bed with desk | A den used as a daily office | Pick a design where the desk stays level when the bed comes down. Check the desk’s weight limit; one queen model we reviewed lists 50 lb. |
| Bed flanked by wardrobe cabinets | Dens with no closet | Gives guests somewhere to unpack. Allow for door swing on the side cabinets. |
| Bed with open shelving either side | Rooms that double as a library or display wall | Items on shelves above the bed should not overhang the opening path. |
| Horizontal bed with shelf on top | Narrow dens or walls with a window | Top surface holds lamps and books, but clear it before opening if the maker requires. |
The wardrobe option matters more in a Burnaby condo than people expect. The Real Estate Board of Greater Vancouver’s guidance, as reported by the CBC, treats a den as any room without a closet. Without wardrobe space, a guest in a den lives out of a suitcase.
Mattress and Mechanism: What Makes a Murphy Bed Comfortable for Guests
A Murphy bed is as comfortable as the mattress on it. The frame and mechanism decide how the bed opens and closes, not how it sleeps. Three rules keep it working properly:
- Stay within the thickness limit. Most Murphy bed systems accept a mattress up to about 10 to 12 inches thick. A thicker mattress can stop the bed closing flush.
- Match the mattress weight to the mechanism. Spring and piston (gas-strut) mechanisms are both calibrated to counterbalance a specific weight range. Too heavy and the bed is hard to lift; too light and it may not stay down.
- Skip the box spring. The frame provides the support. Foam and latex mattresses are widely recommended because they hold their shape when stored upright; advice on coil and hybrid mattresses varies between makers, so follow your bed’s specification sheet.
On mechanisms, piston systems are often described as smoother and quieter, while spring systems can be adjusted for tension. The more important question is whether the mechanism is rated for the mattress you plan to use.
Does a Murphy Bed Turn a Den into a Bedroom?
No. A Murphy bed lets a den host guests, but it does not change how the room is classified. Under the BC Building Code, an unsprinklered bedroom needs an outside window or door that can serve as an emergency exit, as municipal guidance such as this egress window bulletin explains. A room without a closet is generally marketed as a den, not a bedroom.
For occasional guests, a wall bed in a den is a furniture choice. If you plan to rent the room out or describe it as a bedroom when selling, check the requirements with the City of Burnaby and your realtor first.
What Is the Best Murphy Bed for a Small Burnaby Condo?
The best Murphy bed for a small Burnaby condo is the one that fits the room’s depth and ceiling first and its daily use second. Use these rules of thumb as a starting point:
| Your room | Likely best fit |
|---|---|
| Den under about 9½ ft deep, or a bulkhead on the bed wall | Horizontal full or queen |
| Second bedroom about 10 ft deep or more with a flat ceiling | Vertical queen with side cabinets |
| Room used as an office every day | Bed with a desk that stays level, or a bed beside a separate built-in desk |
| Den with no closet | Bed flanked by wardrobe cabinets |
| Child’s room or playroom | Twin or full, to free up floor space for play |
Murphy Beds in Burnaby: When Off-the-Shelf Is Enough and When Custom Makes Sense
A boxed Murphy bed kit works well when the wall is flat, the ceiling is clear, the wall is wood-framed and you only need a bed. A custom Murphy bed in Burnaby is worth considering when the room is less straightforward:
- A bulkhead, window or odd wall length means a standard cabinet will not sit cleanly.
- You want the bed built into a full wall with wardrobes, shelving or a desk.
- The wall is concrete or steel stud and anchoring needs to be planned with the strata.
- The new cabinetry should match existing millwork in the suite.
Local designers can measure the room before recommending an orientation. My Inspired Space, a company that designs custom storage solutions for homes across Metro Vancouver, measures ceiling height, room depth and door swings before suggesting a vertical or horizontal layout, and its page on custom murphy beds in Burnaby shows wall-bed combinations with wardrobes, shelving and desks.
Whichever route you take, bring your six fit-test measurements and your strata’s answer to the first conversation. They decide more about the final design than style does.
Frequently Asked Questions
How much space does a Murphy bed need in a condo?
A vertical queen Murphy bed needs about 85 to 93 inches of floor from the wall when open, plus a 30 to 36 inch walkway, so roughly 9½ to 11 feet of room depth. A horizontal queen needs about 65 to 68 inches open, or roughly 8 to 8¾ feet with a walkway, but a wider wall.
Can I put a Murphy bed in my condo den as a guest room?
Usually, if the den has enough depth and ceiling clearance at the bed wall and the wall can be anchored safely. Many dens suit a horizontal bed. Check your strata bylaws before installing, because anchoring into structure or common property can require written approval.
Do I need strata approval to install a Murphy bed in Burnaby?
If the installation involves the building’s structure or common property, BC’s Standard Bylaws require the strata’s written approval first. Your building may have amended bylaws, so confirm with your property manager.
Can a Murphy bed have a desk?
Yes. Some wall beds include a desk that stays level when the bed is lowered, so you do not have to clear it each time. Check the desk’s weight limit.
Is a Murphy bed comfortable enough for long visits?
Yes, with the right mattress. Comfort comes from the mattress, which must stay within the bed’s thickness and weight limits, typically 10 to 12 inches and no box spring.